Basic Info.
Austenitic
304,304L,316,316L,321
Hole Shape
Round, Square, Hexgonal,Diamond,etc
Package of Sheet
with Pallet
Package of Roll
Water Proof Paper, Woven Bags, Wood Boxes
Transport Package
in Pallet, in Bulk, or Cartons, or as Requested
Specification
as requested
Product Description
Stainless Steel Perforated Metal Mesh
1. Discriptions:
Perforated stainless steel sheet is essentially a low carbon steel which contains chromium at 10% or more by weight. The chromium content of the steel allows the formation of a rough, adherent, invisible, corrosion-resisting chromium oxide film on the steel surface. If damaged mechanically or chemically, this film is self-healing, providing that oxygen, even in very small amounts, is present.
Types:
1).Austenitic
Austenitic stainless steels are non-magnetic non heat-treatable steels that are usually annealed and cold worked. Some austenitic steels tend to become slightly magnetic after cold working. Austenitic steels have excellent corrosion and heat resistance with good formability over a wide range of temperatures. Additions of molybdenum can increase the corrosion resistance.
Typical industry applications: Food equipment, chemical equipment, architectural applications
- 304 Low carbon modification of type 302 for restriction of carbide precipitation during welding.
- 304L Extra-low carbon modification of type 304 for further restriction of carbide precipitation during welding.
- 316 Higher corrosion resistance than types 302 and 304, high creep strength.
- 316L Extra low carbon modification of types 316, used in welded construction where intergranular carbide precipitation must be avoided.
- 321 Stabilized for welds subject to severe corrosive conditions and for service from 800 to 1600F
2). Ferritic
Ferritic stainless steels are magnetic non heat-treatable steels that contain chromium but not nickel. They have good heat and corrosion resistance, in particular sea water, and good resistance to stress-corrosion cracking. Their mechanical properties are not as strong as the austenitic grades, however they have better decorative appeal.
Typical industry applications: Automotive trim, cooking utensils
- 430 General purpose non-hardenable chromium type.
3). Martensitic
Martensitic grades are magnetic and can be hardened by heat treatment. They are not as corrosive resistant as austenitic or ferritic grades, but their hardness levels are among the highest of the all the stainless steels.
Typical industry applications: Fasteners, pump shafts, turbine blades
- 410 General purpose heat treatable type.
2. Hole Diameter: 0.5-100mm
3. Dimension: The most common width and length are as follows:
1000mmX2000mm
1220mmX2400mm
1250mmX2500mm
1250mmX6000mm
1500mmX3000mm
1500mmX6000mm
4. Application: Perforated material is widely use as agriculture equipment, audio, automotive & transport, architecture, design, electronics, noise control, pharmaceutical, filtration, etc.
5. The packing: Wrapped with plastic paper, then in wooden pallet
6. The parameters we need to quote to you are as follows:
1)Hole shape
2)hole Diameter: The size of the holes
3)Hole pattern: Staggered or straight
4)Pitch(the distance between two nearest holes' center)
5)Dimension: Width and length
6)Quantity
Thickness: 0.5-25mm
Thickness of the matel sheets do not change during the perforation.
Plate Material | Thickness of Metal (mm) | Hole Dia. (mm) | Pitch (mm) | Sheet Width (m) | Sheet Length (m) | Porosity (%) | Weight (kg/m2) |
Rolling plate | 0.2 | 6 | 2 | 1 | 20 | 44 | 0.88 |
0.35 | 5 | 4 | 1 | 20 | 24 | 2 |
0.45 | 6 | 3 | 1 | 20 | 35 | 2.5 |
0.8 | 3 | 3 | 1 | 20 | 19.6 | 3 |
Flat plate | 0.5 | 1 | 1 | 1 | 2 | 19.6 | 3.14 |
0.55 | 1.1 | 2.2 | 1 | 2 | 22.67 | 3.411 |
0.55 | 1.5 | 2.8 | 1 | 2 | 26.03 | 3.268 |
0.8 | 1.5 | 1.5 | 1 | 2 | 19.6 | 5 |
0.8 | 2.0 | 3.4 | 1 | 2 | 30.78 | 4.465 |
1.5 | 2 | 2 | 1 | 2 | 19.6 | 9.4 |
1.5 | 5.0 | 8.0 | 1 | 2 | 35.39 | 7.843 |
3 | 5 | 16 | 1 | 2 | 19.6 | 18.8 |
Stainless steel plate | 0.5 | 1 | 1 | 1 | 2 | 19.6 | 3.14 |
0.8 | 1.5 | 1.5 | 1 | 2 | 19.6 | 5 |
1 | 2 | 2 | 1 | 2 | 19.6 | 6.28 |
2 | 5 | 16 | 1 | 2 | 19.6 | 6.28 |
Aluminum plate | 0.5 | 1 | 1 | 1 | 2 | 19.6 | 1.08 |
0.8 | 3 | 3 | 1 | 2 | 19.6 | 1.72 |
1.6 | 2 | 2 | 1 | 2 | 19.6 | 3.24 |
3 | 4 | 16 | 1 | 2 | 19.6 |
Address:
Building No. 2-1, Building No. 1-1, Weier Road, Anping Country, Hengshui, Hebei. China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Furniture, Manufacturing & Processing Machinery, Service, Tools & Hardware, Transportation
Management System Certification:
ISO 9000
Company Introduction:
Anping Yunde Metal Co., Ltd is located at the metal wire mesh production base in Anping County name as China Wire and wire mesh Town. Our main products are Expanded Metal, Perforated Metal, Bar grating Welded Wire Mesh, Crimped Wire Mesh, Stainless Steel Wire mesh, Chain Link Fence.
Anping Yunde has a long-standing tradition of producing high quality products. Our factory We have been manufacturer the architectural and building industry for over 20 years. During this time we have had the opportunity to work on some exciting and interesting projects.
It is always rewarding to see a vision become a reality by using our products in an innovative way. We are always delighted to work with you to ensure that our product can add an edge to your design project. We can work with your CAD drawings to help develop cost effective solutions to your requirements.
Anping Yunde is committed to providing standard and bespoke items, we are continually researching new ideas and looking to provide new products.